A lot of accidents involving Oversize Flatbed Shipping Companies are caused by trucks reversing. Backing up a flatbed truck requires expert driving skills. Drivers need to be mindful of a lot of different things when backing up a heavy haul transport vehicle.
Reliable flatbed trucking companies train drivers to ensure that they back up the vehicle safely. Here are some safety tips when backing up a flatbed truck whether on the road, at the dock, warehouse, or construction site.
1. Plan Before Backing Up
Drivers need to plan how to back up heavy haul transport trucks without any mishap. It is important for them to get out of the vehicle and to walk around to size things up. Planning how to back up the vehicle will help the driver avoid obstacles that are not visible while sitting inside.
Continue reading “Oversize Flatbed Shipping Companies Using Reverse”
Oversize flatbed hauling of cargo from one place to the other may seem easy, but in reality, it is not. It comes with a mix of challenges and complexities of its own, the main one being secure loading. Efficiently securing the load sure helps speed up the delivery process and mitigates the risk of potential losses.
Here are some of the tips flatbed trucking companies in the USA use to make sure their load is secure and protected for the journey ahead.
1. Restraining Using the Right Approach
This is a standard practice followed by many flatbed trucking companies in the United States and rightly so. Restraining is an industry protocol, however, there is a technique and skill to getting it right. Securing it by tying it down firmly using the right rope, net, chain or straps can vary depending on the type of load.
For instance, for cylindrical loads, using a net or web would be the best approach while wedges, chokes, and cradles help keep vehicles from rolling off. On the other hand, for boxes, placing the bigger boxes below and securing them from the front and side with ratchet straps can do the trick – flatbed trucking companies in Alabama swear by these techniques.
Continue reading “Oversize Flatbed Hauling-3 Tips To Ensure Secure Loading”
Every heavy haul transport company must follow state rules when transporting goods. Here are some of the Department of Transport (DOT) road rules that must be complied with by Flatbed Heavy Companies Near Me.
1. Permit Requirements
Flatbed trucking companies in Connecticut have to apply for a permit for transporting a heavy or oversize load that is over 12 inches wide. The permit is valid for up to three days.
2. Escort Cars
Escort or pilot cars are necessary for oversize transport of goods in the state that is over 12 inches wide, 14 inches high, or 80 inches long.
Heavy goods that are between 12 and 13.6 inches wide require only one escort car at the rear. For goods between 13.6 and 15 inches, the state requires two escort cars that should follow the transport truck at the front and rear. If the width of an oversize load is over 15 inches, one escort car should be at the front two at the rear of the transport truck. Continue reading “Flatbed Heavy Companies Near Me Compliance with Road Rules”